Home
About Stable Soils
Benefits
Our Services
• Polyurethane Injection
• Concrete Slab Raising
• Infrastructure Grouting
• Abandoned Pipe Grouting
• Structural Grouting
• Seawall Repair
Media Gallery
Case Studies
Testimonials
Tech Data
Contact Us
download
download

STABLE SOILS
OF FLORIDA
4265 Northwest 44th Ave.
Suite 7
Ocala, Florida 34482

info@stablesoils.com

facebook





Product Technical Data



All of our polyurethane products are environmentally inert and pose no risk to our surroundings! These products are hydrophobic, which means they will set up in wet conditions and form a water-tight barrier. Our foam products are non-shrinking and lightweight (3-4 lb. per sq. ft.). It fills voids as small as 1/32”, and is fire resistant as well as a high-density, closed cell structure. It has a peak compressive strengths of 117+ psi (lifting strength of 16,848 lbs per sq. ft.) and tensile strengths of 123+ psi. Our foam products attain 90% strength in 3 minutes and our soil binder sets in 24 hours, depending on soil moisture.

Polyurethane concrete lifting, stabilization and void filling applications is preferred by Contractors and Department of Transportations around the USA.






Engineering Technical Data
(Downloads)


AP Fill 700: Water activated semi-rigid polyurethane foam injection resin

AP Flush 121: Reusable, biodegradable pump flush

AP Lift 475: Two component, structural polyurethane foam

AP Seal 500: Hydrophilic closed cell polyurethane foam injection resin

AP Soil 600: Moisture activated polyurethane soil stabilization resin




red
NFS Certifications (Downloads)
red

red AP Fill 700: NFS Cerficates

red AP Lift 475: NFS Cerficates

red AP Seal 500: NFS Cerficates

red AP Soil 600: NFS Cerficates

 

 

 


der.


Copyright 2015, Stable Soils of Florida, All rights reserved. Ocala Website design Zed+Zed+Eye Design