Technical Data

Product Technical Data

All of our polyurethane products are environmentally inert and pose no risk to our surroundings! These products are hydrophobic, which means they will set up in wet conditions and form a water-tight barrier. Our foam products are non-shrinking and lightweight (3-4 lb. per sq. ft.). It fills voids as small as 1/32”, and is fire resistant as well as a high-density, closed cell structure. It has a peak compressive strengths of 117+ psi (lifting strength of 16,848 lbs per sq. ft.) and tensile strengths of 123+ psi. Our foam products attain 90% strength in 3 minutes and our soil binder sets in 24 hours, depending on soil moisture.

Polyurethane concrete lifting, stabilization and void filling applications is preferred by Contractors and Department of Transportations around the USA.

Engineering Technical Data (Downloads)

• AP Fill 700: Water activated semi-rigid polyurethane foam injection resin
• AP Flush 121: Reusable, biodegradable pump flush
• AP Lift 475: Two component, structural polyurethane foam
• AP Seal 500: Hydrophilic closed cell polyurethane foam injection resin
• AP Soil 600: Moisture activated polyurethane soil stabilization resin
• SW RP1 TDS: Water activated semi-rigid polyurethane foam injection resin

NFS Certifications (Downloads)

• AP Fill 700: NFS Certificates
  
• AP Lift 475: NFS Certificates
  
• AP Seal 500: NFS Certificates
  
• AP Soil 600: NFS Certificates
• SW RP1 NSF: NSF Certificates